background image

3

The refrigerator (freezer) can be installed by the qualified worker or the after-sales service 
personnel only. The fire or the damage may be caused if it is installed by any unprofessional 
people.

End of life disposal of a unit should only be performed by a professional. Remove the door 
to avoid accidents such as suffocation.

Be sure to place the refrigerator (freezer) on the flat ground. If the ground is uneven, it may 
be fall or the injury or the abnormal noise may be caused.

Dear users,
Thank you for choosing Haier solar refrigerator (freezer), please make sure you have carefully read 
and observed the contents with following signs in the manual, for better understanding of this manual 
and better use of this product, so as to prevent personal injuries and refrigerator damage.

The solar panel must be used with the lightning rod and the ground lead of the solar panel 
mustn’t be connected to the refrigerator (freezer).

Only connect the refrigerator (freezer) with a dedicated power outlet or solar panel specified 
by the nameplate. This is to avoid fire or electric shock.

If the refrigerator is to be decommissioned, unplug the power cord to avoid electric shock, 
current leakage, or fire caused by aged power lines.

If the power cord needs to be lengthen, please refer to the manual for the specification.

If the refrigerator (freezer) is left unused in area where supervision is unavailable for a long 
time, make sure children are not near the unit and the door cannot be completely closed and
locked.

Actions or operations 
which are prohibited

Actions or operations 
which must be followed

Please operate the refrigerator (freezer) in a safe area if it is used for keeping the toxic, 
harmful or radioactive items. The personal injury or the environment damage may be caused 
by the improper use.

Please turn on the valves and open the doors and windows for ventilation immediately when 
there is any leakage of flammable gas. Do not turn off the refrigerator (freezer) or the 
connector.

Be sure to turn off the refrigerator (freezer) switch before the repairing, to avoid the damage.

Take measures to protect the inner part of the equipment against the surrounding drugs or 
the suspended solids in the maintenance and repair process. Otherwise, the health hazard 
may be caused.

Stay the refrigerator (freezer) for 10 min after moving it to another location. Do not connect it 
to the power supply immediately after the displacement. Otherwise, the refrigerating system 
may be damage.

Close the refrigerator (freezer) door cover by holding the door handle, to avoid the finger 
injury.

Safety Precautions

Summary of Contents for HTC-40
































Reviews: