9
Stop injecting the water when the water level is flush to the liquid level.
Fluid level
(2) Pour the complete bottle of corrosion inhibitor into the water tank of the refrigerator.
(3) Place the purified water container (about 50L) in the higher location (higher than the water
tank) on one side of the refrigerator (freezer).
(4) Insert the suction hole of the water suction device into a water container and insert the water
outlet into the water tank. Continuously squeeze the air cell of the water suction device with hands.
In this way, the water flows from the container to the water thank. Stop to squeeze the air cell
when the water begins to flow and the water will automatically flows into the water tank.
(5) Observe the liquid level when injecting the water. When the liquid level is flush to the plane, stop
adding the water.
(6) Please screw in the water injection opening plug.
(7) Cover the head cover and tighten the screw.
9.Selection of solar panel installation location
The solar panel shall face to the equator. Namely, it shall face toward the south direction in the
Northern Hemisphere and toward the north in the Southern Hemisphere.
The dip angle of the solar panel is subject to the terrestrial latitude of the installation location. The
general dip angle of the solar panel is as shown in the figure below.
The front of solar panel must be cleaned once per week or depending on the needs.
