Haier HT-3788, Manual

Page: 6 / 16

SEARCHING AND STORING
1.Preparation for Searching
Connect the antenna (or CATV signal cord) and power
cable, press the power switch, and the picture will display
after indicator lights.
2.Automatic Searching
After auto-searching all programs, the TV can memorize
and store the best states of the programs.
(1)Press the MENU button to display the menu as right
figure.
(2)Press POS+/- button to select AUTO SEARCH
.
( 3)Press VOL +/- button to start searching from present
program, when the TV finishes searching, it will
display the program which start searching from.
3.Manual Searching
You can use this function to preset the program you need
to the channel you selected.
(1)Press the MENU button to display the menu as right
figure.
(2)Press POS+/- button to select MANUAL SEACH.
(3)Pr/- button to start searching, when finds
program, the TV will stop searching, if the program is
not you need ,you can press VOL +/- button to go on
searching.
4.Band Selection
When you use manual searching, if the program you
need is not in present band,
you can change the band to
speed searching.
(1)Press the MENU button to display the menu as right
figure.
(2)Press POS+/- button to select BAND.
(3)Pr/- button to select band you need.
4
设定
PRESET
CHANNEL 004
CH.EXCHANGE - - -
BAND V-L
MEMORY ON
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
设定
PRESET
CHANNEL 004
CH.EXCHANGE - - -
BAND V-L
MEMORY ON
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
设定
PRESET
CHANNEL 004
CH.EXCHANGE - - -
BAND V-L
MEMORY ON
FINE TUNE
MANUAL SEARCH
AUTO SEARCH