15
TELEVISION INSTALLATION
Connect antenna or video facility
1. Use 75 coaxial cable plug or 300-75 impedance converter to plug in antenna
input terminal on the rear of the cabinet.
2. Connect the video facility to the radio, video in jack on the rear of the cabinet.
Install and replace batteries of the remote control unit:
1.Place the remote control unit with the face down, then open the battery cover of
the unit.
2.Place the two"AA"size batteries, match the + and - signs on each battery to the +
and -signs of the battery compartment.
3.Close the cover of the battery compartment.
NOTE:
(1)Don't drop or wet or dismantle the unit.
(2)If you don't intend to use the unit for a long period or the electricity of the
batteries is used up, remove the batteries to prevent batteries acid from leaking
into the battery compartment.
(3)Replace the two old batteries at the same time.
(4)Don't use charge battery (Ni-cd )and don't mix battery type.
(5)Don't throw your batteries into a fire. Dispose of your batteries in a required
place.
-
VHF antenna UHF antenna
Mixer
75 Co-axis cable
Input terminal of antenna
Co-axis antenna plug
Antenna in jack
75 Co-axis antenna plug
CONNECTING OTHER EXTERNAL DEVICES
To connect signal from the player,
scart-cable would be connected
correspondingly. The device may
be to provide RGB or VIDEO or
Y/C output, you can use TV/AV
button to switch to the EURO, AV
signal you need.
15
VCR or DVD player or other
device for playing