Haier HSW59F18DIMM, User Manual

Page: 35 / 313

36
Troubleshooting
CONTENTS
Problem Possible Cause Possible Solution
Strong ice and frost in
the freezer
compartment.

The goods were not
adequately packaged.

A door/drawer of the appliance
is not tightly closed.

The door/drawer has been
opened too frequently or for
too long.

The door/drawer gasket is
dirty, worn, cracked or
mismatched.

Something on the inside pre
vents the door/drawer to close
properly.

Always pack the goods well.

Close the door/drawer.

Do not open the door/drawer
too frequently.

Clean the door/drawer gasket
or replace them by new ones.

Reposition the shelves, door
racks, or internal containers to
allow the door/drawer to
close.
The sides of the
cabinet and door strip
get warm.

-

This is normal.
The appliance makes
abnormal sounds.

The appliance is not located on
level ground.

Adjust the feet to level the
appliance.

The appliance touches some
object around it.

Remove objects around the
appliance.
A slight sound is to be
heard similar to that of
flowing water.

-

This is normal.
You will hear an alarm
beep.

The fridge storage
compartment door is open.

Close the door.
You will hear a faint
hum.

The anti-condensation system
is working

This prevents condensation
and is normal
The interior lighting or
cooling system does
not work.

Mains plug is not connected in
the mains socket.

Connect the mains plug.

The power supply is not intact.

Check the electrical supply to
the room. Call the local
electricity company!

The LED-lamp is out of order.

Please call the service for
changing the lamp.
Water leaking or
dripping from the
water dispenser
spout.

The water tank is not installed
correctly

The water dispenser spout is
not screwed tight to the tank.

The white silicon O ring is
missing from the water spout.

Refit the water tank into the
fridge door, ensure it is pushed
fully into the door.

The water spout is screwed in
firmly to the water tank.

Check the water spout has a
white silicon O ring at the tank
end before fitting the water
spout to the water tank.