Haier HPU-42CV03, Operation And Installation Manual

Page: 8 / 30

Remote
controller
LOW MID HIGH AUTO
Operation
2
1 Press ON/OFF button
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press,
operation mode changes as follows:
4
Remote
controller
AUTO COOL DRY FAN HEAT
Press FAN,For each press, operation mode
changes as follows:
Unit runs at the speed displayed on LCD.
When fan speed is AUTO,it is changed automatically
according to the indoor temperature.
Note:
During Auto run operation, temp. setting will be shown in LCD display, unit will select heating, cooling
or fan operation according to the room temp.
5
6
Select temp. button
Press TEMP button
Every time the button is pressed, temp.
setting increases 1 C
Every time the button is pressed, temp.
setting decreases 1 C
If the button is kept pressed, setting will
increase or decrease quickly. 3
In DRY mode, when room temp.becomes 2 C higher than temp.
setting,unit will run intermittently at LOW speed regardless of FAN
setting.
Ultra-low air flow
Temp.2 C
Temp.setting
COOL operation starts when room
temp. is higher than temp. setting.
On reaching 2 C higher than temp.
setting,unit will run in mild DRY mode.
ON
OFF
TEMP
HEALTH
FAN
MODE
SLEEP SWING
CLOCK
TIMER
SET
LOCK LIGHT
RESET
2
5
HEAT
Then select AUTO run or select COOL operation or
select DRY operation or select HEAT operation
AUTO
COOL DRY FAN
ON
ON
1
3
4
3
Control panel
HEAT
TEMP+
TEMP-
The fan speed change of the control panel see page 12.
Press ON/OFF button Unit stops running.
1
5
3
3
2
4
ON/OFF MODE FAN
HEALTH
TEMP TEMP
TEMP