15
IMPORTANT!
●
Carbon filters are disposable items and must be replaced at least every three months.
●
Saturated carbon filters can become a barrier to air movement, therefore limiting
your range hoods performance.
●
In the event of a fire, grease laden filters could be flammable.
Fitting the carbon filters:
1
Ensure the range hood is switched off.
2
Remove the aluminum grease filters from the range hood.
3
Place a carbon filter on each side of the blower inlet using the keyhole slots for alignment
(refer to
A
), turn the filter until it clips into place (refer to
B
).
Note: The direction will be clockwise on one side of the blower and counterclockwise on
the other side of the blower.
4
Refit aluminium grease filters.
Light bulb replacement
ILCOS D Code: DRR-3.5-220/240-GU10-50/50
1. To replace a light bulb, first disconnect the rangehood
from its power supply.
2. Apply finger pressure to the face of the light bulb and
twist one quarter turn anti-clockwise—the light bulb
will now be free to drop out.
3. Remove the faulty bulb and fit replacement bulb into
the lamp holder.
4. Refit the light bulb by applying finger pressure and
twist one quarter turn clockwise.
Note: replacement bulbs are not covered by
Manufacturer’s Warranty.
CLEANING AND MAINTENANCE
Bulb replacement
B
A
60821290.23.09.2021_INSTRUCTION MANUAL HPH60ILX1_HPH90ILX1.indd 15
60821290.23.09.2021_INSTRUCTION MANUAL HPH60ILX1_HPH90ILX1.indd 15
6/10/21 14:59
6/10/21 14:59