INSTALLATION INSTRUCTIONS
10
WARNING!
●
This appliance is heavy and requires two persons for unpacking and installation
●
Installation work and electrical wiring must be done by qualified person(s) in
accordance with all applicable codes and standards.
●
Failure to install the screws or fixing device in accordance with these instructions
may result in electrical hazards
IMPORTANT!
Wear gloves to protect against sharp edges.
The manufacturer is not liable for any damage caused by not following these instructions.
Installation
1
Prepare for installation.
Before installing your rangehood:
●
Please read the instructions carefully.
●
Unpack the rangehood and check that all functions are working.
●
Ensure that the voltage (V) and the frequency (Hz) indicated on the serial plate
match the voltage and frequency at the installation site.
●
The stainless steel and glass surfaces of the rangehood are very easily damaged
during installation if grazed or knocked by tools. Please take care to protect the
surfaces during installation.
●
Protect the cooktop surface below with cardboard, or the like, to prevent damage
occurring whilst the rangehood is being installed above.
2
Fit the 125 mm ducting adapter with non return flap to the rangehood using the
screws supplied.
3
Provide an opening on the underside of the cupboard (see product and cabinetry
cutout dimensions).
width
depth
2.3
2.2
2.1
x2
60821290.23.09.2021_INSTRUCTION MANUAL HPH60ILX1_HPH90ILX1.indd 10
60821290.23.09.2021_INSTRUCTION MANUAL HPH60ILX1_HPH90ILX1.indd 10
6/10/21 14:59
6/10/21 14:59
