English
6
Unpacking Microwave Oven
1) Unpack the oven, remove all packing material, and examine the oven
for any damage such as dents, broken door latches or cracks in the
door. Notify the dealer immediately if the unit is damaged. Do Not
install if the unit is damaged.
2) Inspect and remove any remains of packing, tape or printed materials
before powering on the microwave oven.
Placement Of Microwave Oven
• The oven must be placed on a flat, stable surface.
• The oven may possibly cause reception interference on
radios and/or televisions.
• In order to eliminate or minimize interference to radios and televisions
from this microwave oven, the oven should be plugged into a separate
electrical socket. In addition, the oven should be physically as far away
from the radio or television as possible.
Proper Air Circulation
• For proper operation, the oven must have sufficient air-flow.
The following are recommended clearances around the oven:
Sides…………………….2" (50mm)
Top………………………1" (25mm)
Back……………………..1" (25mm)
Electrical Requirement
• Make sure there is a suitable power outlet (115-Volt, 15 Amps Outlet)
with proper grounding to power the microwave oven.
• Avoid the use of three plug adapters or cutting off the third grounding
prong in order to accommodate a two-plug outlet. This is a dangerous
practice since it provides no effective grounding for the microwave and
may result in shock hazard.
• The electrical power cord must be kept dry and must not be pinched and
or crushed in any way.
Installing Microwave Oven
HM06R750 manual 10/22/01 11:16 AM Page 7
