10
Soil Level Button
Use this button to select the soil level that is most appropriate for your
load. Based on the soil level, the wash time will increase or decrease by 4-8
minute increments in the Estimated Time Remaining Display.
There are 3 soil levels to choose from - Heavy, Normal, Light
Water Level Button
Use this button to select an appropriate water level for your load. Small is
the lowest water level and Super is the highest.
DELAY START BUTTON
Press this button to delay the start of your wash cycle between 1 - 24 hours
in one hour increments.
Use this button to select a delayed start of the washer. The number of hours
will be shown in the Estimated Time Remaining Display. Each press of the
Delay Wash Button will increase the time by 1 hour.
One button press after 24 will cancel the delay wash feature. You can also
Power Button.
The Start/Pause Button must be selected to begin the countdown.
EXTRA RINSE BUTTON
Press to add an extra rinse to your wash cycle.
NOTE:
Some cycles have this option as a default. See the Cycle Guide for
details.
ESTIMATED TIME REMAINING DISPLAY
The Estimated Time Remaining Display shows the estimated cycle time in
minutes.
When the Delay Start option is being used, the Estimated Time Remaining
Display will show the delay time in hours.
CYCLE STATUS INDICATORS
The Cycle Status lights indicate the stages of the selected cycle.
START/PAUSE BUTTON
Press this button to start a selected cycle or to pause an operating cycle.
NOTE:
After starting the wash cycle, you must pause the operating cycle to
change the Wash Temp, Soil Level and Water Level settings.
POWER BUTTON
Press the power button to turn on the washer.
NOTE:
If the washer is turned on, but START is not pressed, the power will
Issue
Service Manual
Rev.
