background image

2

Chapter2 Product Features

New "smiling face" appearance:

 The appearance of this washing machine 

is novel.It looks like a smiling face , bringing you good feeling.

Transparent view window, new appearance:

It adopts transparent view 

window on the top lid. Therefore the user can see the washing directly without 

having to open the top lid. It is more convenient to use.

Heavy:

 It has special "HEAVY" function applicable for very dirty laundries.

Washboard type stainless steel inner tub: 

The stainless steel inner tub of 

this washing machine is washboard type.It can kneed laundries adequately 

and wash cleaner,reducing abrasion at the same time.

Smaller volume,larger capacity

: It adopts limited design to make good use 

of room,smaller volume and larger capacity.

Music buzzer: 

Adopt the nationally initial music buzzer. The former boring 

buzzer is replaced by the nice music, bringing you more interesting life.

Automatic power-off function

: If the washing machine is not started after 

the power is switched on, or the washing is finished, the power will be 

switched off automatically for the sake of safety.

Alarm against breakdown

: the washing machine will alarm with abnormal 

display and buzzer when the drain hose is not put down, or when top lid is 

open, or the automatic program can not be performed.

Imbalance

-

revising function

: during spinning, if the laundries are slanting 

and bumping the tub, the washing machine will add one rinse automatically to 

revise the imbalance.

-4-

Service Manual

Model No: HLP21N

Issue

Rev.

                         

 

                          

2-1.    Features

                         

 

                          

Summary of Contents for HLP21N



























Reviews: