Haier HL26R-A, Owner'S Manual

Page: 10 / 31

2
1
1 1
Y Pb Pr L R
L R VIDEO VIDEO
S-VIDEO S-VIDEO
VGA VGA AUDIO VGA AUDIO
AUDIO AUDIO
L R
AUDIO AUDIO
OUT
L
R
DVI AUDIO DVI AUDIO
AUDIO AUDIO
L R AUDIO AUDIO
COMPONENT
IN
COMPONENT
IN
VIDEO
IN
VIDEO
IN
1
AUDIO
O
UT
AUDIO
O
UT
VGA
IN
HDMI
IN
HDMI
IN
ANT
IN
ANT
IN
OPTICAL
O
UT
OPTICAL
OUT
VCR connection
NOTE: All cables shown are not included with the TV.
There are several ways to connect your television, depending on the components you want to connect
and the quality of the signal you want to achieve. The following are examples of some different ways
to connect your TV with different input sources.
Choose Your Connection
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
Connection Option 1
Set VCR output switch to channel 3 or 4 and
then tune the TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from the
VCR's output jacks to the TV input jacks, as
shown in the figure.
When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
If you connect an S-VIDEO output from VCR to
the S-VIDEO input, the picture quality is
improved; compared to connecting a regular
VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner`s
manual.)
3. Select the input source with using the
INPUT button on the remote control, and
then press
/ button to select the source,
press OK button to confirm.
Installation
Connection Instructions
10 TV LCD-TFT