Haier HIO-M59CF, Installation Manual/User Manual, Page: 10 / 25

Electrical connection
Warning!
All electrical work must be carried out by a qualified and authorized electrician.
 Before attempting the connection, check whether the voltage indicated on the rating plate corresponds
to the actual mains voltage.
 Mains lead should be minimum 1.5m long.
 Earthing wire should be installed in such manner to be the last one pulled out in case the safety relief
device of the mains lead should fail.
 Mains lead behind the oven must be placed in such manner to avoid touching the back panel of the
oven because of the heat it develops during operation.
 The cable of correct size rating must be used. Cable type H05VV-F 3×1.5m m2 or equivalent
can be used. The grounding wire should be longer than the other wires.
Connection
 Using the screwdriver open the connector cover at the rear of the appliance. Release two locks
located at either side of the connector bottom.
 Mains lead must be led through the relief safety device, protecting the mains lead cable from
disconnection.
 Tighten the relief device securely and close the connector cover
220-240 V 50 Hz
Colour code
L=exterior live wires, usually coloured black, brown. N=neutral
The colour is usually blue.
Beware of the correct N-connection!
E=earthing wire, the colour is green/yellow.