Haier HDHP80AN1, User Manual

Page: 6 / 32

1-Safety Information
6
WARNING!
Maintenance / cleaning
˜
Clean the lint filter and the condenser fi lter after each pro-
gramme (refer to CARE AND CLEANING).
˜
Do not use water spray or steam to clean the appliance.
˜
Do not use industrial chemicals to clean the appliance.
˜
Replace a damaged supply cord only by the manufacturer, its ser-
vice agent or similarly qualifi ed persons in order to avoid a hazard.
˜
Do not try to repair the appliance by yourself. In case of repair
please contact our customer service.
Installation
˜
Ensure a location which allows opening the door fully. Do not in-
stall the tumble dryer behind a lockable door or a door with
hinges on the opposite side of the tumble dryer door as this
limits the full opening of the tumble dryer door.
˜
Install the appliance in a well-ventilated, dry place.
˜
Never install the appliance outdoors in a damp place, or in an
˜ Ins
area which may be prone to water leaks such as under or near a
sink unit. In the event of a water leak cut power supply and allow
the machine to dry naturally.
tall or use the appliance in places where the temperature is
above 5 °C. If install the product in a low temperature room, and
using the product continuously, there might be some water
condensation and drops on floor.
˜
Do not place the appliance directly on a carpet, or close to a wall
or furniture.
˜
Do not expose the appliance to any frost, heat or direct sunlight
or in the near of heat sources(e.g. stoves, heaters).
˜
Make sure that the electrical information on the rating plate
agrees with the power supply. If it does not, contact an electri-
cian.
˜
Do not use multi-plug adapters and extension cables.
˜
Make sure not to damage the electric cable and the plug.
˜
Use a separate earthed socket for the power supply which is
easy accessible after installation. The appliance must be earthed.
NZ AU