7
The grounded cord:
²
When the washer is using, it must link the
ground well.
²
If the washer has the grounded cord in its
outlet, please don't use prepared wire.
²
If the washer has not the grounded cord in
its outlet, we must use the prepared wire
to link from the grounded terminal on the
upper right of the washer back, then make
sure this line shall link the ground well.
10
Preparation
Clothes type
Biggest load
Non-fading
clothes
6kg
Soft fabric
2kg
Wool fabric
1kg
Textile
2.5kg
1. Power Resource: Connect the power resource
2. Connected the water resource: Open the tap, the water should be pure.
Attention: Each time before the washer work, first should open the
tap to check up the joints between the tap and pumping hose, check
if there is leaking phenomenon in case the accidence.
3. The Clothes' Disposal
²
The classification according to the clothes' types and dirty degrees:
The clothes' types: Cotton, Chemical Fiber, Silk.
²
Make a different between the white clothes and color clothes. If wanted
to Wash these together, first should proceed a test with manual, be sure
if adhesion strength is ok, the fade clothes should
wash separately.
-- Put the objects (coins, money etc.) out the pack, and has the pack
outside.
-- When washing the non-rim or loosing threads' clothes, must put it
into the string bag in case clothes damage (Suggestion: don't use
the machine washing).
-- Sew the worn, loosing button, slide fastener and close the bag.
-- It should be put in loosely for the big objects, such as the sheet,
tablecloth etc. don't fold.
-- Have the shirt's inner outside.
4. Put the detergent into
Open the allocating box, put the detergent into.
5. The best washing load
Attention:
The prepared wire can't link with
the water pipe or the central heating pipe.
7
If the washer is far from the water source,
we could longer the draining hose or lineup
through the wall. (but the hose can't be longer
than 5m, the diameter of longer hose shall be
as same as the original hose, the part of the
longer hose shall be firm and can't leak)
We can utilize the support to install the water
pipe. (fig.7)
Attention:
the draining nozzle can't immerge
into the water
