Haier HD100-A2979, Manual

Page: 24 / 108

EN
11-Installation
24
11.1 Preparation
seen. This normal phenomenon results from water tests in the factory.
Remove all packaging material including the polystyrene base.
Notice
ring current disposal routes, consult your retailer or the local authorities.
11.4 Installation under worktop
●
The dimensions of the recess should at least agree
1.
●
Put the appliance adjacent to the slot. Make sure that
all connections are easily accessible and functional.
2.
3. Install the appliance prudently into the recess.
4.
11.5 Electrical connection
Before each connection check if:
power supply, socket and fusing are appropriate
●
to the rating plate.
●
the power socket is earthed and no multi-plug
or extension.
the power plug and socket are strictly according.
WARNING!
●
WARNING!
hours before use.
11.2 Transport and waiting time
Transport the appliance in horizontal position only. To the maintenance-free lubrication
oil is located in the capsule of the compressor. This oil can get through the closed pipe
system during slanting transport. Before connecting the appliance to the power supply
you have to wait 2 hours so that the oil runs back into the capsule.
11.3 Aligning the appliance
11-1
11-2
11-3