Haier HD100-A2979, Manual

Page: 23 / 108

EN
10-Troubleshooting
23
Troubleshooting without display-codes
Problem Possible cause Possible solution
Tumble dryer
fails to operate. Poor connection to the power
supply.
Power failure.
No drying program is set.
Device has not been switched
on.
The water tank is full.
The door is not closed properly. Check connection to the pow-
er supply.
Check the power supply.
Set a drying program.
Switch the device on.
Empty the water tank.
Close the door properly.
Tumble dryer
fails to operate
and the display
shows
.
The laundry has reached the
gramme?
There is no laundry in the drum?
●
Check if the program setting
is appropriate.
Check if there is laundry in the
drum.
Drying time is
too long and
the results are
●
not satisfactory
The programme setting is not
correct.
The evaporator is blocked.
The tumble dryer is overloaded.
The laundry is too wet.
The vent duct is blocked.
Make sure the program is set
correctly.
Clean the evaporator.
Reduce the amount of laun-
dry.
Spin the laundry properly be-
fore drying.
Check the vent duct and unblock
it.
Remaining time-
on the display-
stops or skips. The remaining time will be adjus-
ted continuously based upon the
following factors:
Type of laundy.
Moisture degree of the laundry.
The automatic adjustment is a
normal operation.