Haier HCR3818ENPT, User Manual

Page: 7 / 546

Safety information
GB
Before switching on the appliance for the first time read the fol-
lowing safety hints!:
WARNING!
Before first use
▶ Make sure there is no transport damage.
▶ Remove all packaging and keep out of children´s reach.
▶ Wait at least two hours before installing the appliance in order to
ensure the refrigerant circuit is fully efficient.
▶ Handle the appliance always with at least two persons because it
is heavy.
Installation
▶
The appliance should be placed in a well-ventilated place. Ensure
a space of at least 10 cm above and around the appliance.
▶
Never place the appliance in a damp area or location where it
might be splashed with water. Clean and dry water splashes and
stains with a soft clean cloth.
▶
Do not install the appliance in direct sunlight or in the near of heat
sources(e.g. stoves, heaters).
▶
Install and level the appliance in an area suitable for its size and
use.
▶
WARNING: Keep ventilation openings in the appliance or in the
in-built structure clear of obstruction.
▶
Make sure that the electrical information on the rating plate agrees
with the power supply. If it does not, contact an electrician.
▶
The appliance is operated by a 220-240 VAC/50 Hz power sup-
ply. Abnormal voltage fluctuation may cause the appliance to fail
to start, or damage to the temperature control or compressor, or
there may be an abnormal noise when operating. In such case, an
automatic regulator shall be mounted.
▶
Do not use multi-plug adapters and extension cables.
▶
WARNING: Do not locate multiple portable socket-outlets or
portable power supplies at the rear of the appliance.
▶
WARNING: When positioning the appliance, ensure the supply
cord is not trapped or damaged.
▶
Do not step on the power cable.
▶ Use a separate earthed socket for the power supply which is easy
accessible. The appliance must be earthed.
4