English
15
For your convenience, this beer dispenser can be converted to a beverage cooler
application. Simply follow the steps below for a quick and easy conversion.
Note:
When using as a beverage cooler, we do not recommend the use of
casters, as stored items may fall off the shelves when the unit is in motion.
1. Close the main valve on the CO
2
cylinder.
2. Close the connection between the beer keg and the keg coupler by pulling
and lifting the handle of the keg coupler into an upright position.
3. Disconnect both the beer line and the CO
2
gas line from the keg coupler.
4. Remove the beer keg from the cabinet.
5. Disconnect the gas line from the CO
2
cylinder.
6. Remove the CO
2
cylinder from the cabinet.
7. Remove the beer tower from the cabinet.
8. Pull the beer line through the top of the cabinet.
9. Install the cabinet tap hole cover on the worktop.
10. Lay the unit down sideways. We recommend that you place a piece of
cardboard or cloth underneath the cabinet to avoid dents or scratches to the
cabinet. Remove the casters and install leveling legs.
11. Install the two wire shelves.
A. Insert one end of each support pin into the holes on the right side of the
cabinet.
B. Place one end of the wire shelf into the left side of the cabinet and rest the
other end onto the exposed support pins on the right side.
C. Repeat the same with the second shelf.
12. The conversion process is now complete. Store all the removed accessories
in a safe place for future use.
13. Adjust the temperature of the unit as required for food storage.
CONVERTINg THE bEER dISPENSER TO AN
bEVERAgE COOlER APPlICATION
