background image

2. Unplug the appliance before replacing the old light bulb to prevent electric shock. 

̃ǃ

Never store inflammable or explosive items and strong corrosive acids or       

alkalis in the appliance. 

̄ǃ

This appliance is a household refrigerator, which is produced in accordance       

with the specification of national standard. It is intended for food storage only       
not for storage of blood, medicine and biological products. 

̅ǃ

To prevent risk of fire, keep the appliance away from gasoline or any other 

            inflammables. 

j

ǃ

To prevent risk of electromagnetic interference or other accidents, do not 

place any patch panel, voltage stabilizer and microwave oven on top of the 

refrigerator or use any electric appliance (unless recommended by the 

manufacturer) inside the refrigerator. 

k

ǃ

Children are not allowed to play with the door or the bottle racks. Serious 

injury may occur. 

l

ǃ

The internal surface of freezer compartment is very cold when the 

appliance is running. Do not touch the surface especially when hands are wet. 

m

ǃ

The gap between the doors and the gap between the doors and the 

cabinet are very small. Make sure figures do not get stuck. Always keep 

children away when a door is opened or closed. 

n

ǃ

Do not splash water onto the refrigerator. Keep off places of high humidity 

that may have adverse effect on the electric insulation performance. 

o

ǃ

No dismantlement or modification can be made without authorization. 

Damage to refrigeration system is strictly prohibited. Reparation must be 

carried out by authorized personnel. 

p

ǃ

Bottled beer or beverage should not be stored in the freezer 

- 4 -

Summary of Contents for HB21FNN









































Reviews: