Haier HB21FNN, Service Manual

Page: 3 / 40

SAFETY RECAUTIONS
˽ǃ Power supply: AC 220V/50HZ
If the voltage fluctuates violently (beyond 187~242V), it is necessary to use a voltage
stabilizer of 750W or above to prevent startup failure, damaged control board or
compressor, or unusual noise.
˾ ǃ The appliance must be plugged into a dedicated outlet that is securely
grounded.
The power cord of this appliance is fitted with the three-prong plug (grounded) that
complies with the standard three-prong outlet (grounded). Never cut off or remove
the third prong. The refrigerator should be located so that the plug is accessible.
WARNING! The plug should be securely connected to the socket or otherwise fire
hazard may arise.
˿ǃ
Be careful not to damage the power cord.
1. Always pull at the plug other than the cord itself to disconnect the appliance from
the outlet.
Route the power cord in a way to eliminate the risk of damage caused by the
weight of refrigerator or treading.
2. Be careful not to damage the power cord when moving the appliance away from
the wall.
̀ǃ When the power cord is damaged
The use of cracked cord or worn plug is strictly prohibited. If the power cord is
damaged, it should be replaced in an authorized service center.
́ǃ When there is a gas leakage
1. Shut off the gas valve.
2. Open the doors and windows for ventilation.
3. Do not plug or unplug the refrigerator or other electric appliances.
̂ǃ
Always remember to unplug the appliance in the following cases:
1. Unplug the appliance before cleaning and reparation.
- 3 -