How to use
Start cooking
Touch the ON/OFF control for three seconds.
After power on, the
buzzer beeps once, all displays show “–” or “– –”, indicating that the
induction hob has entered the state of standby mode.
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the cooking
zone are clean and dry.
Touching the heating zone slider control ,
and a indicator next to the
key will flash.
Select a heat setting by touching the slider control
• If you don’t choose a heat setting within 1 minute, the Induction
hob will automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
If the display flashes alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
EN
G
LIS
H
No heating takes place unless there is a suitable pan on the cooking zone.
4HEDISPLAYWILLAUTOMATICALLYDISAPPEARAFTERMINUTEIFNOSUITABLEPANISPLACEDONIT
power up
power down
EN-10
Summary of Contents for HAFRSJ64MB1
Page 2: ......
Page 4: ...EN 3 ...
Page 5: ...ENGLISH Haier Haier EN 4 ...
Page 6: ...Haier EN 5 ...
