– 24 –
1. Locate a spacer on the bottom side with its
holes over the leveling leg holes. Attach
spacer using two screws. Attach the second
spacer on the other bottom side using two
screws.
NOTE
: The arrows on the spacers
should point to the outside.
1. Carefully lay the dryer on its back or side.
Use the packing material so not to scratch the
finish on the dryer.
2. Use an open-end wrench or pliers to remove
all four dryer leveling legs.
NOTE
: Retain the
leveling legs for future use.
Remove The Leveling Dryer Legs
Install Spacers to Dryer Bottom
Installing Appropriate Brackets
Select the appropriate brackets for your model
sizes. Using the outside holes in the bracket,
attach it to the top left corner of the washer back
using four screws. Repeat on the top right corner
of the washer back.
Make sure the arrows on the
spacers point to the outside.
Front
Attach spacer
using two screws
Back
Attach spacer
using two screws
Make sure the arrows on the
spacers point to the outside.
Washer
Depth
Dryer Depth
Bracket
Number
32-inch
32-inch
32-inch
34-inch
32-inch
34-inch