12
31-5000516 Rev. 3
Installation Instructions
Step 3 - Electrical Connections
Electrical connections indoor and outdoor units
14/4 non-shielded stranded copper cable Only.
Maintain 10 feet of separation between TV and any
Radio wiring.
NOTE:
Do not use end terminals.
NOTE:
Tighten connector terminals to manufacturers
torque rating
NOTE:
If cable connecting Indoor & Outdoor unit > 180ft
(55m), the Indoor unit ground wire should be separated
from the cable.
Step 4 - Leak Testing and Evacuation
Refer to the outdoor section Installation Manual for the recommended procedure.
Wifi Pairing
'RZQORDGW4DSSIURP*RRJOH3OD\$QGURLGRUWKH$SSOHDSSVWRUH,26
After downloading the App:
2. Open the app.
3. Select “Sign In”.
4. Sign into your account or register as a new user.
5. Select the “+” icon to add a new device and follow the directions in the app.
Step 2 - Installation of the Cassette Unit (cont)
I.
([WHUQDO,QVWDHLJKW6HWWLQJ8VLQJ4$&7$
ACT17CWA (Wired Controller)
• After backlight is lit at the wired controller off, press and
hold FAN and TEMP + button for 10 seconds.
• The static pressure selection will appear in the upper
right hand corner.
• The Installation Height Grade can be adjusted by
pressing
TEMP +
or
TEMP -
buttons.
• Press
FAN
button to confirm the change.
Installation Height Grade
Installation Height
1 (Default)
2.7m (8.9ft)
2
2.7 - 3.7m (8.9 - 12.1ft)
3
3.7 - 4.2m (12.1 - 13.8ft)
L1 L2
1 2 3
1 2 3
POWER SUPPLY
208/230V 60Hz
Outdoor unit
terminal blocks
Indoor unit
terminal block
&$66(7(
C1C2
central controller
A
B
