27
English
English
GDE/GDG 750AW
1. Turn the knob to any program except “OFF” to power on. The control panel
will beep once and the dryer will change from “OFF” to the operating status.
If Start/Pause button is not pressed five minutes after powering on, the dryer
will automatically return to OFF status.
2. Set the cycle select dial to Rack Dry Cycle.
3. Press “Timed Dry” button to set the required drying time.
4-6. Press “Temp” and “Signal” to define the required programs.
Note: For “Rack Dry” program use of “Temp” and “Signal” buttons is the
same as for auto-programs. “Dry Level” is inactive.
Other Features
Your dryer also has the following features for your convenience:
Lint Filter:
• All dryers come with a lint filter that needs to be cleaned before or after every
use (read “Care and Cleaning Guide” Section).
Leveling Legs:
• Your dryer has four leveling legs which are located in the front and rear corners
of your dryer. After installing your dryer in its final position, you can level your
dryer.
• Leveling legs can be adjusted by turning them clockwise to raise your dryer or
by turning them counterclockwise to lower your dryer.
R AC K DR Y C Y C L E
Timed Dry
Dry
Level
Temp
Signal
Cycle Select
Cycle Process
Auto Dry
Timed Dry
Clean Lint
Drying
Cool Down
W rinkle Saver
90
60
30
20
10
More
No rmal
Less
Louder
Softer
Off
High
Medium
Low
No Heat
Off
Timed Dry
Heavy Duty
Rack D ry
Normal
Touch Up
Whites
Delicates
GDE/GDG 750AW