background image

 

 

 

 

 

5

Service Manual

 

Model No:DW9-TFE3 Series

 

Issue

 

Rev.

 

 

3.How to read this Service Manual 

The symbol 

 on the product or on its packaging indicates that this product may not be 

treated as household waste. Instead it shall be handed over to the applicable collection point for 
the recycling of electrical and electronic equipment. By ensuring this product is disposed of 
correctly, you will help prevent potential negative consequences for the environment and human 
health, which could otherwise be caused by inappropriate waste handling of this product. 
For more detailed information about recycling of this product, please contact your local city office, 
your household waste disposal service or the shop where you purchased the product. 

Warning: 

 

A “warning” is used when there is danger of personal injury. 

Caution: 

 

A “caution” is used when there is danger that the reader, through incorrect manipulation, may 
damage equipment, loose data, get an unexpected result or has to restart (part of) a procedure. 

Notice: 

 

A “notice” provides information that is not indispensable, but may nevertheless be valuable to the 
reader. 

 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

                         

 

                          

                         

 

                          

Summary of Contents for DW9-TFE3-E












































Reviews: