Haier DW12-PFE8 series, Operation Manual

Page: 14 / 240

EN
How to load the salt
Salt
The hardness of the water varies from place to
place. If hard water is used in the dishwasher,
deposits will form on the dishes and utensils.
The appliance is equipped with a special softener
that uses a salt specifically designed to eliminate
lime and minerals from the water.
Loading the salt into the container
J
When the low salt indicator “J” lights, you must
fill the salt.
Remove the lower rack and then unscrew and
remove the cap from the salt container;
If you are filling the container for the first time,
fill it with water;
Place the end of the funnel (supplied) into the
hole and introduce about 2 kg of salt. It is normal
for a small amount of water to come out of the
salt container.
Carefully screw the cap back on.
Important:
To prevent the formation of rust, load the salt just before
beginning a wash cycle.
Always use salt intended for use with dishwashers.
The salt container is located beneath the lower rack and should be filled as follows:
13