55
SET Press the button “Set”
To display: 5
56
If “5” is not displayed
, press “Up
▲
” / “Down
▼
”for resetting.
To display: 5
57
Press the button “Set”
To display: AH
58
By pressing the button “Up
▲
” To
display:
Ad
59
Press the button “Set”
To display: 0
60
If “0” is not displayed
, press “Up
▲
” / “Down
▼
”for resetting.
To display: 0
61
Press the button “Set”
To display: Ad
62
By pressing the button “Up
▲
”
To display: H1
63
Press the button “Set”
To display: 0
64
If “0” is not displayed
, press “Up
▲
” / “Down
▼
”for resetting.
To display: 0
65
Press the button “Set”
To display: H1
66
By pressing the button “Up
▲
”
To display: H2
67
Press the button “Set”
To display: 1
68
If “1” is not displayed
, press “Up
▲
” / “Down
▼
”for resetting.
To display: 1
69
Press the button “Set”
To display: H2
70
Press the button “Set” for over 5 seconds to save the set value To display the current internal
temperature value
Note:
Error signals of this temperature controller are “E0” and “E1”. When there comes a short circuit,
breakage, fault or incorrect connection for the temperature sensor, the display screen shall show “E0”.
When there are wrong settings for the parameter /4 (default 1) or the parameter D0 (default 2), the display
screen shall show “E1” with the buzzer alarming and the alarm indicator blinking. If it is the case, it is
necessary to check the wiring and parameters’ setup.