Haier DTA-1496, Service Manual

Page: 8 / 16

8
7. OP7
Bit Function Description Preset Remark
Bit 7 FMWS 1=Enable 1 EA
Bit 6 HOTEL 1=Enable 0 EA
Bit 5 PROG_ID 1=Enable 0 EA
Bit 4 LED 1=Enable 0 EA
Bit 3 TWIST 1=Enable 0 EA
Bit 2 BYELORUSSIAN 1=Enable 0 EA
Bit 1 UKRANIAN 1=Enable 0 EA
Bit 0 AV1 1=Enable 1 EA
8. OP8
Bit Function Description Preset Remark
Bit 6 DIRECT_SWITCH_ON 1=Enable 0 EA
Bit 5 INNER_DVD 1=Enable 1 EA
Bit 4 PROG_FREQ 1=Enable 0 EA
Bit 3 FAST_BAR 1=Enable 1 EA
Bit 2 AUSTRALIA 1=Enable 0 EA
Bit 1 FREQ 1=Enable 1 EA
Bit 0 9860 1=Enable 0 EA
Note
：
Don
’
t adjust any OPTION items, please inform the engineer about any change.
5. ICs functional description
1. N201 UOC OM8377
SYMBOL PIN DESCRIPTION
STAND BY output. 1 In STAND BY mode, low level (Power OFF).
For Power ON this pin will be high.
SCL 2 I
2
C-bus clock line
SDA 3 I
2
C-bus data line
TUNING 4 tuning Voltage (Vt) PWM output
KEY 5 Control keys input
SYSTEM 6 TV system control
VOL 7 Sound Volume control PWM output
MUTE 8 Sound mute output
VSSC/P 9 Digit ground for
μ
-controller core and periphery
CTL 10 DVD power control
STANDBY 11 STANDBY control
VSSA 12 Analog ground of digital ground of TV-processor
SECPLL 13 Internally connected
VP2 14 2
nd
supply voltage TV-pro8V)
DECDIG 15 decoupling digital supply of TV-processor
PH2LF 16 Phase-2 filter
PH1LF 17 Phase-1 filter
GND3 18 Ground 3 for TV-processor
DECBG 19 Band gap decoupling
AVL/EWD 20 Automatic volume levelling
VDRB 21 Vertical drive B output
VDRA 22 Vertical drive A output
IFIN1 23 IF input 1
IFIN2 24 IF input 2