Display for 1s
Display for 1s
Display for 1s
Display for 1s
Display for 1s
12. SLEEP
(1) Valid in ON state.
（
2
）
The duration of Sleep shall be fixed at 8 hours, and this duration can’t be regulated.
（
3
）
Sleep function is unavailable under the fan mode.
13. TIMER:
(1) TIMER ON
•
When a user presses “TIMER ON” for the first time, “TIME ON” flashes, press “+/-” to
regulate and confirm the time of TIME ON. If “CONFIRM” is not pressed within 10s,
“TIME ON” display will be cancelled.
•
If the preset time of TIME ON is the same as the current time displayed by the clock,
“TIME ON” keeps flashing and the preset time can’t be confirmed. A user need set
another time of TIME ON.
•
When the current time reaches to the preset time of TIME ON, the preset time and
“TIME ON” will disappear.
（
2
）
TIMER OFF
•
Press “TIMER OFF” again, “TIME OFF” flashes, press “ +/-” to regulate and confirm
the time of TIME OFF. If “Confirm” is not pr
cancelled.
•
If the preset time of TIME OFF is the same as the current time displayed by the clock,
“TIME OFF” keeps flashing and the preset time can’t be confirmed. The user need to
set
“
TIME OFF
”
for another time.
•
When the current time reaches to the preset time of TIME OFF, the preset time and
“TIME OFF” will disappear.
（
3
）
TIMER
ON/OFF
After setting TIME ON and TIME OFF, the remote-controller will automatically judge
the sequence of the set time ,and run orderly, then TIME ON and TIME OFF will
disappear.
If the set time for TIME ON and TIME OFF is the same, the later set (TIME ON or
TIME OFF) will flash and it needs to set again.
14. +/- :
Press “ +/-” to set the time. If press the “+/-“ for about 10 seconds, the set time will
change more quickly.
15. CLOCK:
Press the "CLOCK" key, the "AM" or "PM" will flash , then press “ +/-” key to
regulate the time, and press the “COMFIRM” key to finish
16. Lighting:
Function reserved
17. Password:
Function reserved
11
essed within 10s, “TIME OFF” display will
be
Function reserved
19.Reset:
Each time a user presses this key, he starts the power-on reset.
18. Query
Operation
