MAINTENANCE
21
[
Dismantle and install swing plate
]
3. Install swing plate
Lightly rotate swing plate to insert the ridge at
both ends of the outlet into the groove and then
screw up.
For detailed information consult dealer.
Perfect circuit connection.
If any abnormal cases, consult dealer.
2. Call technician to clean air-filter and shell.
3. Turn on power
Air-filter must be installed after cleaning.
After power turned on, some information on remote controller will display .
No blocks in the inlet /outlet of the indoor/outdoor unit.
Good earthing.
1. Check the following items:
At the beginning
Maintenance at the beginning and closing of the applying seasons
NOTE
When not in use for a long time
1. In fine days, go on with blowing for half a day, to make inner part of conditioner dry.
2. Turn off power supply.
3. Call technician clean air-filter and shell.
For details of blowing, see page 10.
If power not turned off, conditioner will consume several and dozens of KWH, To turn off power
can save electricity.
After power turned off, information on remote controller will disappear.
