background image

Questo prodotto contiene gas fluorurati ad effetto serra inclusi nel Protocollo
di Kyoto. 

Non liberare tali gas nell’atmosfera.

Tipo di refrigerante: 

R410A

Valore GWP*: 

1975

*

GWP = potenziale di riscaldamento globale

Compilare con inchiostro indelebile,
• 1

la carica di refrigerante di fabbrica del prodotto

• 2

la quantità di refrigerante aggiuntiva nel campo e 

• 1+2

la carica di refrigerante totale

sull’etichetta di carica del refrigerante fornita con il prodotto

L’etichetta compilata deve essere collocata in prossimità della portata di cari-
ca del prodotto (ad esempio, nell’interno del coperchio della valvola d’inter-
cettazione).

A

contiene gas fluorurati ad effetto serra inclusi nel protocollo di Kyoto

B

carica di refrigerante di fabbrica del prodotto: vedi targhetta con il nome
dell’unità

C

quantità di refrigerante aggiuntiva nel campo

D

carica di refrigerante totale

E

unità esterna

F

cilindro del refrigerante e collettore di carica 

INFORMAZIONI IMPORTANTI SUL REFRIGERANTE UTILIZZATO

Haier Industrial Park, No.1 Haier Road, Qingdao, P.R.China

1

1+2=

kg

R410A

2

kg

2=

1=

B

C

D

F

E

kg

Contain

s

 fluorinated greenhou

s

e ga

s

e

s

covered by the Kyoto Protocol

A

This product contains fluorinated greenhouse gases covered by the Kyoto
Protocol. 

Do not vent into the atmosphere.

Refrigerant type: 

R410A

GWP* value: 

1975

*

GWP = global warming potential

Please fill in with indelible ink,
• 1

the factory refrigerant charge of the product

• 2

the additional refrigerant amount charged in the field and

• 1+2

the total refrigerant charge

on the refrigerant charge label supplied with the product.

The filled out label must be adhered in the proximity of the product charging
port (e.g. onto the inside of the stop valve cover).

A

contains fluorinated greenhouse gases covered by the Kyoto Protocol

B

factory refrigerant charge of the product: see unit name plate

C

additional refrigerant amount charged in the field

D

total refrigerant charge

E

outdoor unit

F

refrigerant cylinder and manifold for charging

IT

IMPORTANT INFORMATION REGARDING THE REFRIGERANT USED

EN

Ce produit contient des gaz à effet de serre fluorés encadrés par le protoco-
le de Kyoto. 

Ne pas laisser les gaz s’échapper dans l’atmosphère. 

Type de réfrigérant: 

R410A

Valeur GWP*: 

1975

*

GWP = potentiel de réchauffement global

Prière de compléter à l’encre indélébile,
• 1

la charge de réfrigérant d’usine du produit

• 2

la quantité de réfrigérant supplémentaire chargée sur place et

• 1+2

la charge de réfrigérant totale

sur l’étiquette de charge de réfrigérant fournie avec le produit.

L’étiquette complétée doit être apposée à proximité de l’orifice de recharge
du produit (par ex. à l’intérieur du couvercle de la vanne d’arrêt).

A

contient des gaz à effet de serre fluorés encadrés par le protocole de
Kyoto

B

charge de réfrigérant d’usine du produit: voir plaquette signalétique de
l’unité

C

quantité de réfrigérant supplémentaire chargée sur place

D

charge de réfrigérant totale

E

unité extérieure

F

cylindre de réfrigérant et collecteur de recharge

INFORMATION IMPORTANTE RELATIVE AU RÉFRIGÉRANT UTILISÉ

FR

Summary of Contents for 3HUM20HA03/R2













Reviews: