To assist in location possible faults use help guide below:
BREAKDOWN PHENOMENON
PICTURE
SOUND
CHECKING
the aerial direction and connection
volume
、
sound mute
Ensure that the power supply is connected to
the TV set and turned on. Also ensure that the
TV set is not in "Listen Mode" or that the
brightness and contrast are not turned down.
adjust color control
adjust channel again
Colour purity fault which can be caused by moving
the TV set, placing magnets near the TV screen or
turning on/off house hold appliances such as
vacuum cleaners near the TV set. Turn the TV off
with the mains power switch for 15 minutes.
When the power is turn on again the TV set will
automatically degauss the picture. In server cases
leave the TV set turned off over night.
Picture with Snow
Noise
Color Spot
Normal Volume
Scramble
Normal or Weak Volume
No Color
Normal Volume
No Picture
No Sound
No Sound
Normal
Normal
Disturb
Noise
Double or Triple Image
Note:
1.If the fault can not be repaired by using above guide consult with your local authorized service center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt
to remove the back cover as the TV set has dangerous voltages in side that may cause a fatality or fire.
3.The cabinet may produce the occasional "snapping sound" This is normal and caused by
the materials in the cabinet expanding with room temperature changes.
TROUBLESHOOTING GUIDE
Electrical interference which can be caused by
cars, motorbikes etc, fluorescent lamps and
dirty insulators on overhead power cables.
This is called ghosting which can be minimized
with an outside aerial, and good quality cable
and terminations. Altering the aerial direction
can also minimize this effect.
15
