Haier 32D3000B, Service Manual

Page: 49 / 56

48
1
0
.
T
r
o
u
b
leshooting 10-1 Simple Check
Please make these simple checks before calling service. These
tips may save you time and money since charges for receiver
installation and adjustments of customer controls are not covered
under your warranty.
Symptoms Items to Check and Actions to Follow
No power • Check if the TV’ s AC power cord is plugged into a working
power outlet. • Unplug the TV, and wait 60 seconds. Then
reinsert plug into the working power outlet and turn on the TV
again.
No picture • Make sure correct input source is selected. • Check antenna
connection on the back of the TV to see if it is properly connected.
• Possible broadcast station trouble. Try another channel. •
Adjust the picture contrast and brightness settings.
Good picture but no sound • Increase the volume level by pr button on the remote
control or VOL+ button on TV side control panel. • Press button
on the remote control to ensure mute is off.
Good sound but poor color • Adjust the contrast, color and brightness settings.
Poor picture
• Poor picture quality may occur when an activated S-VHS
camera or camcorder is connected to your TV and the other
peripheral at the same time. Switch off one of the peripherals.
Snowy picture and noise • Check the antenna connection.
TV not responding to
remote control • Check whether the batteries are working. Replace if necessary.
• Make sure the remote control batteries are installed correctly.
• You can still use the control buttons on the side of your TV.
TV not working • Disconnect the TV from the power supply for 10 seconds, then
reconnect the TV. If the problem persists, contact authorised
service personnel for technical assistance.
No file displayed in USB
mode • Make sure you select correct media type. • Make sure the
stored files are in supported format.