Set up GeoFencing function steps:
Basically, there are two ways to set up the geo fence function and both ways are
independent to each other. For instance, if you set up the geo fence alarm on the map
radius, the trigger will only report to the tracking site. If you set up the geo fence
function from the Manage -> Device Setting, from the SMS or from the computer set
up program, it will only report the alarm to the phone (and not to the tracking site)
1. Set up geo fence radius on the tracking site:
1.
Move the mouse cursor to the preferred geo fencing point and double click it.
The red bubble will appeared:
2.
Key in the preferred geo fencing radius range (in km) and click Set.
After the clicking, the blue circle will appeared on the map.
User can select to get the geo fencing alarm when the tracker enter or leave the
radius range.
Summary of Contents for HI-602X
