HAI OMNI IIe Owner'S Manual Download Page 92 | Manualshive

Page: 92 / 118

background image

Page 84

AUDIO CONTROL

Once configured by your installer, from any OmniTouch touchscreen, you can control on/off, volume, and muting of any Audio
Zone on the HAI Hi-Fi system. Furthermore, you can select the Audio Source (up to 6 Audio Sources) and Audio Zones (up to 8
Audio Zones) on the HAI Hi-Fi audio distribution system.

To control the HAI Hi-Fi system from an OmniTouch touchscreen, press the “Audio” icon on the Home page. By default, the
interface control Audio Zone 1 on the HAI Hi-Fi system. The Audio Zone can be changed using the “Zone” button on the
touchscreen interface. Once the Audio Zone has been changed, it becomes the new default Audio Zone for that OmniTouch
touchscreen. If desired, each OmniTouch touchscreen can be configured to default to a different Audio Zone.

The top line on the display will show the Audio Zone name (e.g. Living Room), followed by: ON (the Audio Zone is currently
on), OFF (the Audio Zone is currently off), or MUTE (the Audio System is currently muted). Justified to the right of the display
on the top line is the current volume level for the Audio Zone, displayed as a percentage (0%-100%).

The second line on the display will show the Audio Source name (e.g. AM/FM TUNER, CD PLAYER, MP3 PLAYER, etc.).

Once completed, press the Exit icon to return to OmniTouch Home page.

Changing Audio Source

To select a new Audio Source for the current Audio Zone, press the “Source” button on the touchscreen interface. Select the
desired Audio Source from the Source list box.

Changing Audio Zone

To select a new Audio Zone, press the “Zone” button on the touchscreen interface. Select the desired Audio Zone from the Zone
list box. Once selected, you will be able to control that Audio Zone from the touchscreen interface. The selected Audio Zone
will be the default for that OmniTouch touchscreen until a different Audio Zone is selected.

Configuring Source and Zone Names

The names that are displayed on the OmniTouch touchscreen interface for Audio Source and Audio Zone must be configured in
the Omni IIe controller. A name must be given to each Audio Source and Audio Zone to make it available in the respective list
box when changing the Audio Source or Audio Zone.

When your Omni IIe is configured to control HAI Hi-Fi, certain unit numbers (currently flag units) are allocated for Audio Source
or Audio Zone names. This means that the allocated unit numbers will no longer be displayed in the unit list.

Unit numbers 113-118 are allocated for the Audio Source names. These names should match the names of each Audio Source in
your audio distribution system. For example:

Audio Distribution System

HAI Omni IIe

Source 1

AM/FM Tuner

Unit 113

AM/FM Tuner

Source 2

XM Tuner

Unit 114

XM Tuner

Source 3

Home Theater

Unit 115

Home Theater

Source 4

CD Player

Unit 116

CD Player

Source 5

Satellite

Unit 117

Satellite

«
...
90
91
92
93
94
...
»

Summary of Contents for OMNI IIe























































































































Reviews:

No comments

Related manuals for OMNI IIe

Brand: IBM Pages: 144

Brand: Samson Pages: 56

Brand: Hach Pages: 128

Brand: Yamato Pages: 33

Brand: Jedo Pages: 26

Brand: Hama Pages: 7

Brand: Hama Pages: 44

Brand: RadioMaster Pages: 10

Brand: K&K Pages: 6

Brand: Panamax Pages: 16

Brand: Valcom Pages: 6

Brand: UNISENSE Pages: 16

Brand: Xylem Pages: 48

Brand: Madison AV Pages: 2

Brand: WABCO Pages: 4

Brand: Rayrun Pages: 4

Brand: Parker Pages: 29

Brand: ZKTeco Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands