Page 12
Powering the Hi-Fi2 System
The built-in power supply powers the entire system including the Hi-Fi2
processor, zone amplifiers, Remote Input Modules, and Volume-Source
Control keypads.
1)
Insert the supplied IEC Power Cord into the power jack (above the
Expander connector) under the section labeled “Power” on the Hi-Fi2
Main Assembly.
2)
Plug the power cord into a 120 VAC outlet. The “Standby” LED
indicator will flash for several seconds as the Hi-Fi2 system starts.
Once operational, the “Standby” LED indicator will remain
illuminated. Follow the instructions in the User’s Guide for operation.
Expanding the Hi-Fi2 System
The Hi-Fi2 System can be expanded to 16 audio zones by adding
a Hi-Fi2 8-Zone Expander (HAI Part Number: 95A12).
The Hi-Fi2 Expansion Assembly must be mounted below the
Hi-Fi2 Main Assembly, within 6 inches.
To connect the Expander, insert the supplied ribbon cable into
the Expander connector under the section labeled “To Expander”
on the Hi-Fi2 Main Assembly.
Connect the other end of the ribbon cable to the connector on the
Hi-Fi2 Expander under the section labeled “To Main”.
Refer to the instructions in the Hi-Fi2 Expander Installation
Manual.
Summary of Contents for HI-Fi2
Page 4: ...Page 2 HI FI2 WIRING DIAGRAM ...
Page 16: ...HAI New Orleans LA U S A ...
