Page 11
Variable Outputs
Zone 1 and Zone 8 are equipped with a pre-amp variable output for use with an optional power amplifier
that allows you to deliver more power to the zone speakers. This is ideal for outdoor areas or a large
living room where more power and/or additional speakers are desirable.
To connect Zone 1 and/or Zone 8 to an optional power amplifier using a stereo patch cable:
1)
Connect the power amplifier to the Hi-Fi2 Main Assembly by inserting a 3.5mm stereo
connector into the 3.5mm jack labeled “Line Out Zone 1” or “Line Out Zone 8”
(HAI 62A14-1, 3.5mm male to 2 RCA male retractable patch cable may be used).
If your power amplifier is equipped with a voltage trigger that will turn on the amplifier when energized:
a)
Connect the voltage trigger of the power amplifier to the Hi-Fi2 Main Assembly by inserting
a 3.5mm mono connector into the jack labeled “System Sys. On”.
b)
When any audio zone is turned on, Hi-Fi2 supplies 5 VDC to the “System Sys. On” output.
c)
When all audio zones are turned off, Hi-Fi2 supplies 0 VDC to the “System Sys. On” output.
SPEAKERS
AUDIO IN 2
AUDIO IN 1
POWER OUTPUTS
VOLTAGE
TRIGGER
SPEAKERS
POWER AMPLIFIER
Summary of Contents for HI-Fi2
Page 4: ...Page 2 HI FI2 WIRING DIAGRAM ...
Page 16: ...HAI New Orleans LA U S A ...
