HAI HI-Fi2, User Manual

Page: 7 / 16

Page 5
If there is no interaction with the VSC for more than 20 seconds, the menu will be exited and the display
will revert back to the source setting. You can also manually exit from the Zone Menu by pressing and
holding the
src button for 2 seconds.

Press and release the src button to advance to the next menu item.

Press the Power button to go back to the previous menu item.

Press the + button to adjust the current item.

Press the – button to adjust the current item.
Setting Zone Balance Level
The Balance setting allows you to change the balance levels for the left and right speakers in the
respective audio zone. To change the balance level setting, press the
+ button (1 to 10) to attenuate the
left channel. Press the – button (-1 to -10) to attenuate the right channel.
After modifying the Balance setting, press and release the
src button to advance to the Bass menu item.
Setting Zone Bass Level
The Bass setting allows you to change the bass level for the respective audio zone. To change the bass
level setting, press the
+ button (1 to 10) to increase the bass level and press the – button (-1 to -10) to
decrease the bass level. The bass level can range from -10 to 10.
After modifying the Bass setting, press and release the
src button to advance to the Treble menu item.
Setting Zone Treble Level
The Treble setting allows you to change the treble level for the respective audio zone. To change the
treble level setting, press the
+ button (1 to 10) to increase the treble level and press the – button
(-1 to -10) to decrease the treble level. The treble level can range from -10 to 10.
After modifying the Treble setting, press and release the
src button to advance to the Loudness menu
item.
Setting Zone Loudness
The Loudness setting allows you to increase or decrease the intensity of the audio output for the
respective audio zone. To change the loudness level setting, press the
+ button to enable the loudness
level and press the – button to disable the loudness level.
After modifying the Loudness setting, press and release the
src button to advance to the Brightness
menu item.