49
SELECT CONDITION:
NEVER
×
Choose "NEVER" if you wish to temporarily deactivate a program without deleting it.
Other conditions include:
•
IF LIGHT
•
IF DARK
•
IF ENERGY LO
•
IF ENERGY MID
•
IF ENERGY HI
•
IF ENERGY CRIT
•
IF PHONE DEAD
•
IF PHONE RING
•
IF PHONE OFFHK
•
IF PHONE ONHOOK
•
IF AC PWR OFF
•
IF AC PWR ON
•
IF BATTERY LOW
•
IF BATTERY OK
Set Up Dial
The Set Up Dial menu is used to configure all of the telephone related items for the Aegis 1000. To enter the Set Up Dial menu,
from the Setup menu, press the 4 (DIAL) key. Use the arrows to scroll through the items. For each item, the top line displays a
description of the item and its current setting. The bottom line shows the available ranges for your selections.
Phone numbers can be up to 24 characters long. The number is shown on the bottom line of the display. Press the OFF key to
enter a ' - ' into the number. Press the DAY key to specify a pause of 2 seconds (shown as a "T" on the display). Press the
NIGHT key to enter a ' # ' into the number. Enter a single ' - ' for no number.
Telephone Access
The Telephone Access item allows you to turn the local (in-house) and remote telephone control feature on and off.
If set to On, the Aegis 1000 will allow local and remote telephone access as described in Telephone Control. If set to Off, the
Aegis 1000 will not answer incoming calls ever, and will not work on the in house phones. Dial outs will still occur, and the
system will operate normally when the Aegis 1000 dials out.
If you do not have your Aegis 1000 connected to a phone line, set Telephone Access to Off to keep the system from displaying
"PHONE LINE DEAD". The default setting for Telephone Access is On.
Answer Outside Call
If you do not want your system to answer outside calls, set this item to No. The local (in-house) telephone control features will
still work, but the system will never answer an incoming call.
The default setting for Answer Outside Call is Yes.
Remote Commands
The Remote Commands Ok item allows you to prevent any commands from being issued from a remote telephone.
If Remote Commands Ok is set to Yes, the Aegis 1000 will allow all commands to be executed when called from a remote
telephone. If Remote Commands Ok is set to No, then lights, appliances, and the security system cannot be controlled from a
remote telephone that dials into your home.
