Select Mounting Location:
Select the mounting location so that an intruder will cross the beams of the selected pattern. As the detector is a
wireless transmitter, and in order to take full advantage of the sophisticated operation of the PIR, do not install
the detector in areas where large metal objects could interfere with the transmission of signals. It is also
advisable to avoid the following locations:
•
Facing direct sunlight.
•
Facing areas that may change temperature rapidly.
•
Areas where there are air ducts or substantial airflows.
•
Installation on a metal wall.
The 47A00-1 performs best in a constant and stable environment.
Mounting the Detector:
The 47A00-1 can be mounted in a corner like any standard PIR or can be easily mounted to a wall or ceiling by
using the supplied hardware.
Standard Corner Mounting
1)
Remove the screw at the bottom of the case and open.
2)
Carefully mount using the screw guides for flat surface or corner mounting. It is acceptable to bend the
antenna slightly in order to mount the case to the wall or desired surface.
Wall or Ceiling Mount
The supplied hardware is used to attach the 47A00-1 to a wall or ceiling. See diagram below.
