GB
28
• The <ZOOM/C.FN> button will not work.
C.Fn: Setting Custom Functions
The following table lists the available custom functions of this flash.
Protection Functions
1. Over-Temperature Protection
• To avoid overheating and deteriorating the flash head, do not fire
more than 30 continuous flashes in fast succession at 1/1 full power.
After 30 continuous flashes, allow a rest time of at least 10 minutes
• If you fire more than 30 continuous flashes and then fire more flashes
in short intervals, the inner over-temperature protection function may
be activated and make the recycling time over 10 seconds. If this
occurs, allow a rest time of about 10 minutes, and the flash unit will
then return to normal
• When the over-temperature protection is active,
< >
is shown on
the LCD display
Number of flashes that will activate over temperature protection:
Custom Function
Signs
St
AF
bL
Function
Auto
Power off
AF - assist
beam
Backlighting
control
Setting No.
ON
OF
1 - 5
OF
10
OF
ON
Setting & Description
Auto Power off enable
Auto Power off disable
AF Assist beam level
AF Assist beam disable
Off in 10 sec.
Always Off
Always lighting
C.Fn Custom Functions
1. Press the
< ZOOM >
Button for 2 seconds until C.Fn menu is displayed.
2. Turn the
Select Dial
to select a Custom Function.
3. Press the
<SET>
Button and the Setting blinks.
4. Turn the
Select Dial
to set the desired setting. Pressing the
<SET>
Button
will confirm the settings.
5. Press the
<ZOOM>
Button to exit.
