Hague Quality Water WaterMax ST Series, Owner'S Manual And Installation Manual

Page: 7 / 48

WaterMax ST Series Owner’s Manual 5/11/2018 7
Customer Settings
Service Settings must be set before Customer Settings; Service Settings should be set during installation of the
appliance.
To program Customer Settings on the controller, tap twice on the screen to bring up the “Main Menu.”
Tap “Customer Settings” .
Note: If a value displayed on the screen is correct, press Ok to move on to the next programmable value.
Step 1
Set Day and Time
Display reads “Set Time” followed by the current day and time that is set (Ex. Mon 1:00pm).
To Change the Day and Time
A. Tap “day” to change the day of the week.
B. Enter the time (hh:mm).
C. Tap “AP” for AM or PM.
D. When the desired day and time are displayed, press Ok.
Step 2
Set Regeneration Time
Display reads “Regeneration Time” followed by the current regeneration time that is set
(Ex. 02:00am).
To Change the Regeneration Time
A. Enter the desired regeneration time (hh:mm).
B. Tap “AP” for AM or PM.
C. When the desired regeneration time is displayed, press Ok.
Step 3
Set Regeneration Mode
Mode 1 and Days of the Week only (see Operating Modes).
Step 4
Set Silent Mode Start Time
Display reads “Quiet Start Time” followed by the current time that is set (Ex. 12:00am).
To Set the Silent Mode Start Time
A. Enter the desired silent mode start time (hh:mm).
B. Tap “AP” for AM or PM.
C. When the desired time is displayed, press Ok.
Step 5
Set Silent Mode Stop Time
Display reads “Quiet Stop Time” followed by the current time that is set (Ex. 06:30am).
To Set the Silent Mode Stop Time
A. Enter the desired silent mode stop time (hh:mm).
B. Tap “AP” for AM or PM.
C. When the desired time is displayed, press Ok.