HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]
Bug fix
Lift jams when moving down (opening)
The lift has been designed in such a way that it is unlikely that the mechanics will jam when the
lift is opened. This is ensured by safe and clear guidance of the tension belt.
Disconnect the power supply
If the beamer lift does not lower, even though engine noise can be heard when it is actuated,
this could be due to a blockage in the mechanics. When the blockage is released, the lift with
beamer could suddenly fall down into the lower position and on people below. When inspecting
and releasing the blockage, be careful not to stand under the lift. In the event of a defect, do not
carry out any repair work. Contact the customer service: See contact below.
Safety instructions
Risk of shear in the event of an unexpected start! If the ceiling mount starts unexpectedly when
a blockage is released, fingers could be sheared off. Therefore, do not reach into the mechanics
of the ceiling bracket when loosening a blockage. Before loosening a blockage, disconnect the
ceiling mount from the power supply and put the plug away in the immediate vicinity so that you
can supervise it immediately to prevent unauthorized insertion.
Ceiling bracket jams when moving up (closing)
The lift has been designed in such a way that it is unlikely that the mechanism will jam when the
lift is closed. This is ensured by safe and clear guidance of the tension belt.
Disconnect the power supply
If the beamer lift does not lower, even though engine noise can be heard when it is actuated,
this could be due to a blockage in the mechanics. When the blockage is released, the lift with
the installed beamer could suddenly fall down into the lower position and on people below.
When inspecting and releasing the blockage, be careful not to stand under the lift. In the event
of a defect, do not carry out any repair work. Contact the customer service: See contact below.
Safety instructions
Risk of shear in the event of an unexpected start! If the lift starts unexpectedly when a blockage
is released, fingers could be sheared off. Therefore, do not reach into the mechanics when loo
-
sening a blockage. Before loosening a blockage, disconnect the lift from the power supply and
put the plug away in the immediate vicinity so that you can supervise it immediately to prevent
unauthorized insertion.
Remote control of the ceiling bracket cannot be found
If the remote control is lost, a new one can be provided. The lift can also be operated via a
universal remote control, which is not included. Please note the operating instructions for the
universal remote control. When installing the beamer provide an inspection opening that allows
access to the beamer from behind, even if it is fully retracted.
In offices and when used in commercial areas, we recommend that you provide a hard-wired
blind button in addition to the remote control (contact us for the connection diagram). The lift
can also be used in the event that the remote control is lost. Use a hard-wired blind switch only
in offices in a commercial environment and not in private rooms, because the hard-wired blind
switch enables the lift to be operated for children.