Digitech ENU rev. Feb 2011
©Haglöf Sweden®AB
Mantax Digitech
- 10 -
BATTERY
The caliper will alert the user when the battery needs to be changed by showing ‘Bat0’ in the display.
Collected data will remain in the memory also when changing the battery. The memory is of a non-volatile type
and does not need any backup battery. When changing battery, the version number of your caliper firmware is
shown in the display. Depending on number of previous registers, you may have to wait up to 6 seconds before
you can start working with the caliper after replacing the battery.
LOCAL
Measured trees are stored in the internal memory in the Local menu.
The number of captured measurements is featured in the display for a short while. Registration of tree species
and diameters can be made in two different ways, and your choice is made under
SET
in the menu. When
delivered, the Digitech caliper is set in 3-key registration mode.
1-KEY REGISTRATION (1BUT)
Press the caliper jaws around the object to measure a diameter. Select species by pressing the number as
stated below with the E-key.
1 short press for tree species 1
2 short presses for species 2
3 short presses for species 3
4 short presses for species 4
5 short presses for species 5 (or 1 fast +1 long press)
2 short p1 long press for species 6
3 short p1 long press for species 7
4 short p1long press for species 8
3-KEY REGISTRATION
Pick species 1..8 with the arrow keys L or R. Press the jaws around the object to
measure and press E.
Tree species’d’ offer to feature the diameter in the display without registering
any value (see double scale function next side).
DOUBLE SCALE FUNCTION
1-KEY REGISTRATION (1BUT)
If pressing E for a short while, the current diameter will be shown in the display but no registration will be
stored. Keep pressing the E key and move the caliper jaws to zero position (0) when you temporarily wish to
V 1.6
1034