20
ATTACHMENT SYSTEM
Attach NTB to Machine
FOLLOW THESE STEPS:
1. Disengage quick attach lock assemblies to lock-out position.
2. Lower the front of the machine by turning the
air-dump valve on left-front leg and lower front
airbags. See
Figure 21
3. Square machine up to NTB attachment and
pull up to attachment hooks
slowly
.
4. Continue to pull machine up to attachment
until hook openings are high enough to clear
the lock pins. See
Figure 22
.
5. Turn air-dump valve on left-front leg to fill front
airbags. See
Figure 21
.
*Make sure attachment hooks lock onto lock
pins and quick attach holes line up.
6. Turn the engine OFF.
7. Engage quick attach lock assemblies. See
Figure 17
.
8. Connect hydraulic, electrical, solution and
foamer lines (if equipped). See
Figure 19
.
9. Start machine and raise attachment off level
surface.
10. Slowly and carefully back machine with
attachment out of storage location.
Figure 21: Front leg airdump valve
Figure 22: Attachment clearing machine lock pins
Turn the engine OFF before disconnecting
any hoses or electrical lines! Failure to do so
may result in serious injury or death.
