Presentation
The XEVA205 (TIC/CHP) card is a gateway that
allows the exchange of meter data between an old
or new generation of electronic energy meter and a
Hager charging station. It offers the charging station
the option of being informed in real time of electrical
consumptions in order to manage the dynamic
charge of the vehicle (adaptation of the vehicle
charge depending on the dwelling’s consumption).
In conjunction with the Hager XEVA220 WiFi card,
it monitors the dwelling and vehicle consumptions
based on rates through an application on your
mobile phone.
The TIC/CHP card receives data from electronic
meters or TIC XEV304 or XEV305 simulators and
transmits them to the terminal controller.
1.
Your customer has a new generation energy meter:
It is possible to connect the meter and TIC card
using a wire via a remote energy meter cable and
radio via the Hager TRPS120 radio transmitter to
be installed in the new generation meter.
2.
Your customer has a blank electronic energy
meter (previous generation):
The meter and the TIC card can only be
connected by a wire via a remote energy meter
cable.
3.
Your customer has a Ferraris electromechanical
meter (without TIC):
To obtain a TIC, you can create a wired
connection using a remote energy meter cable
between the TIC XEV304 (for single-phase
network) or XEV305 simulator (for three-phase
network) and the TIC card.
Refer to the XEV304 and XEV305 product
manual.
Image 1:
description of the card
1. QR code for product identification
2. CHP output
3. CHP input
4. TIC input (new generation meter) and electronic
meters with a TIC output
5. Power supply and connection terminal (via the
controller card)
6.
fct
function pushbutton and LED used for
programming the RF link operating mode.
Excluding configuration, the
fct
LED indicates the
status of the TIC.
7.
cfg
configuration pushbutton and LED used for
programming or configuration.
a
Carte TIC/CHP
z
TIC/CHP card
Safety instructions
Electrical devices must only be installed
and assembled by a qualified electrician.
The accident prevention recommendations
applicable in the country must be followed.
Failure to follow the installation instructions
may result in damage to the device, fire or other
dangers. Please follow the recommendations
and standards applicable for SELV electrical
circuits during installation and when laying
cables. Before any work on the device or the
load, switch off the power to the installation. Do
not forget all the circuit breakers that deliver
voltages which are potentially dangerous to the
device or the load. Risk of electric shock.
• The TIC/CHP card must be installed when
the charging station is switched off.
• Please read the maintenance manual before
servicing a charging station.
• The device must only be installed by
an electrician, in accordance with the
installation standards applicable in the
country.
• Follow the SELV installation rules.
How to dispose of this product
(electrical and
electronic equipment waste). (Applicable in
European Union countries and other European
countries with selective waste collection
systems). This symbol on the product or its documentation
indicates that it must not be disposed of with other
household waste at the end of its life cycle. As disposing of
waste inappropriately may harm the environment or human
health, please separate it from other types of waste and
recycle it responsibly. In this way you will contribute to the
sustainable re-use of material resources. Individuals
should contact the retailer who sold them the product or
contact their local council to find out where and how they
can dispose of this product for recycling in an
environmentally friendly manner. Companies should
contact their suppliers and read the terms of their sales
contract. This product must not be disposed of with the
other commercial waste.
TIC card installation precautions
Electronic components such as the TIC card
may be damaged by electrostatic discharges
(ESD) when they are removed from their
packaging. To ensure you correctly install your
TIC/CHP card, we recommend:
• Holding the edges of the card only, to avoid
touching the sensitive components.
• Wearing an antistatic bracelet when
handling the card to prevent any damage.
If you do not have an antistatic bracelet,
touch a metal object connected to the earth
before handling the card to remove any
static electricity from your body.
Regularly touch the metallic object when
handling the card.
• Until the TIC/CHP card is installed, store it in
its packaging to protect it from electrostatic
discharges, or on an antistatic support.
XEVA205
6LE009104A
KNX
TP RF
nouvelle
génération
4
