07
Connecting to the IP network
ATTENTION!
We recommend installing the
system in a segmented LAN
network (separated from any
other use) and protecting it with
a fi rewall.
ç
The outdoor station is connected to the in-
door stations and the local IP network via the
TJA470 / TJA510N gateway.
The outdoor station is commissioned via the
confi guration interface of the appropriate
gateway.
Switch
LAN / WLAN
Confi g-
uration
Fig. 28: Connecting to the IP network
Mounting of the outdoor station
The installation housing is mounted and the
required connection cables in the housing
have been prepared.
Connect the connection cables and
network cables to the outdoor station
according to Figure 28.
Stick the size of the two-part cable entry
seal (22) required for the cables in the
connection compartment cover plate (21)
and in the connection compartment of the
outdoor station. Then, insert the connec-
tion compartment seal (23) in the recess
provided around the connection compart-
ment and then close it by screwing on
the connection compartment cover plate
(Figure 29).
(21)
(22)
(22)
(23)
Fig. 29: Cable entry, outdoor station
(21) Connection compartment cover plate
(22) Two-part cable entry
seal
(23) Connection compartment seal
Attach the outdoor station to the top two
straps of the installation housing and
swing it to the installation housing at the
bottom (Figure 30).
A
B
Fig. 30: Insertion of the outdoor station
Using the safety screw (10), screw the
outdoor station to the installation housing
at the bottom centre (Figure 31).
(10)
Fig. 31: Securing the outdoor station
RFID cards
The RFID cards are contactless cards from
the MIFARE DESfi re range with a unique
serial number (UID), which is used as an
identifi er.
There are 3 types of RFID cards, with diff er-
ent access authorisations:
The
Confi guration card
for the
electrician (white corner), allowing
local polling and setting of various
parameters.
The Confi guration card is set at the factory
for the confi guration of this outdoor station
and, initially, only works with this outdoor
station. At a later time, the card can also
be assigned to other outdoor stations.
The
Registration card
for the
administrator (white banner).
It allows the display of the PIN
codes, the addition of RFID cards
and the teaching-in of faces for
facial recognition (RTQ521
X
).
The Registration card is set at the factory
for the confi guration of this outdoor station
and, initially, only works with this outdoor
station. At a later time, the card can also
be assigned to other outdoor stations.
The
User card
for the tenant
(completely blue ), authorising the
user to open the door.
The User card can be registered on multi-
ple outdoor stations.
Confi guration via the touch display
The Confi guration card allows the local
settable of some parameters directly on the
outdoor station.
Hold the
Configuration card
(white cor-
ner) in front of the RFID card reader of the
outdoor station to identify yourself.
Fig. 32: Identifi cation with the Confi guration
card
The
settings
(Figure 33) appear on the
touch display.
Select the setting to be changed on the
touch display (Figure 33) and follow the
instructions on the display.