3
Preparing the device for installation
(example “2 USB” version)
The device is delivered with a transparent dust protection sticker. This sticker must remain on
the device during the time of installation.
Frame
1
Notch
Carefully loosen the frame on the notch with a flat-blade screwdriver or similar tool.
Lift up and remove the frame (
1
).
Connecting the device
E
N
L
2
Strip connection cables approx. 10 ... 12 mm.
Wire the device according to the connection diagram (
2
).
Installing the device into the wall box
(example “2 USB” version)
3
After wiring, fix the device with the two screws attached into the wall box (
3
).
