Service Conditions
Hager distribution boards must only be fitted with Hager Equipment and
arrangements specified in Hager Technical documents and catalogues.
Indoor Use Only
Pollution degree: 3
Forms of separation: Form 3b when outgoing shrouds are fitted. A
competent person must always complete a risk assessment and appropriate
test to confirm that, the un-shrouded neutral within the Panelboard is not a
hazardous live part. In particular, The Electricity at Work Regulations 1989
including any amendments must be complied with.
Note 1 -
or rating of main incomer whichever is lower
(I
nc
)
Diversity/Loading Factor
/RDF
0.7
0.6
Performance Characteristics
Panelboard to BS EN 61439-2 (unless stated otherwise)
690V a.c. 50Hz
415V a.c. 50Hz
6kV
(Subject to
compliance
with relevant regulations in the current edition of BS
7671)
Warranty
This distribution board is offered with a 24 month warranty against defective
material or manufacture. If a warranty claim is necessary, please call the
technical support number given at the bottom of the page and we will be
pleased to help.
J
F6/JF8
Incomer
Ki
ts
JF
6/JF8
Accessories
JF003BP
JN001BP
JFPLATE
JF801E
JF801EG
JF803E
JF803EG
JF805DK
JF805E
JF
806E
JF806DK
3P BLANKING PLATE 250A FRAME
1P BLANKING PLATE 125A FRAME
JF4 & 8 ENDPLATE
SMALL DIN RAIL BOX, PLAIN DOOR
SMALL DIN RAIL BOX GLAZED DOOR
LARGE DIN RAIL BOX, PLAIN DOOR
LARGE DIN RAIL BOX, GLAZED DOOR
DOOR KIT FOR SMALL SPREADER BOX
SMALL SPREADER BOX (NO DOOR)
LARGE S
PREADER BOX (NO DOOR)
DOOR KIT FOR LARGE SPREADER BOX
ZD0741
Issue
6
JF
6/JF8
Surge Protection Kit
JF8
61SPD
Type 1+2 Surge Protection Kit
JF
6/JF8
Incoming Meter Kit
JF8
03MID
MID Multifunction Meter Pack
6
0
0A
415 a.c. 50Hz
800A
415 a.c. 50Hz
Maximum C
urrent (l
nA
)
JF6**/JF8** Using outgoing x160 / P250 MCCB
JF6**/JF8**
Using outgoing x160 / P250 MCCB
50Hz
TNC-S, TN-S and
TT
IK05
Electromagnetic compatibility (EMC) classification
EMC Environment B
Metallic Enclosure
Class 1
Wall mounted stationary
assembly fixed
Ui
Ue
Uimp
Rated Frequ
ency
Suitable earthing system
Mechanical Impact Protection
T
ype F
No. of Main Circuits
with x Frame MCCB's
6 to 9 inclusive
10 and above
Diversity factor for P250 Frame devices 0.6 RDF for 6 way and above.
Range of out
going devices
MCCB x160 frame
16 - 125A
MCCB x250 frame
100 – 250A
MCCB p250 frame
40 – 250A
MCCB
BS EN 6
0947
-2
J
K222PK
KEY LOCK WITH ONE KEY
*NOTE - Dimensions can be found on the hager web site www.hager.com/uk.
IP3X with
do
or closed
IP2X
with
do
or
open
and
compliment
of outgoing devices and blanks fitted. Suitable
for Fixed Connection (FF) Forms of Internal Separation 3b
Max cable capacity
Cat Ref
JF844BSW
M12 Lug
JF864BSW
M12 Lug
M12 Lug
*800LBS
JF884BD
M12 Lug
JF843BM
M12 Lug
JF844BM
M12 Lug
JF863BM
*4 Pole 400A H3+ MCCB Incomer Kit Electronic LSI MCCB
*Note Compatible with P range of MCCB's
M12 Lug
JF864BM
4 Pole 400A Load Break Switch 25kA
4 Pole 630A Load Break Switch 25kA
4 Pole 800A Load Break Switch
800A Direct Connection Kit 4 Pole
3 Pole 400A MCCB Incomer Kit 50kA Electronic LSI MCCB
4 Pole 400A MCCB Incomer Kit Electronic LSI MCCB
3 Pole 630A MCCB Incomer Kit 50kA Electronic LSI MCCB
4 Pole 630A MCCB Incomer Kit 50kA Electronic LSI MCCB
M10 Lug
*3 Pole 400A H3+ MCCB Incomer Kit 50kA Electronic LSI MCCB M12 Lug
JF843
P4
M12 Lug
JF844
P4
Short Circuit Withstand Ratings:-
Main busbar:
JF6/JF8 range
Icw 35 kA for 1 sec / Ipk 73.5 kA
Icc 50 kA rms conditional / Ipk 105 kA
Main Neutral arrangement:
JF6/JF8 range
Icw 24 kA for 1 sec / Ipk 50.4 kA
Main Earth arrangement:
JF6/JF8 range
Icc 25 kA 1-ph conditional / Ipk 52.5 kA
Distribution busbars:
x160
Icc 25 kA rms conditional / Ipk 52.5 kA
x250
Icc 40 kA rms conditional / Ipk 84.0 kA
P250
Icc 40 kA rms conditional / Ipk 84.0 kA
Main Incomers:
JF884BD
Icw 35 kA for 1 sec / Ipk 73.5 kA
Icc 40 kA rms conditional / Ipk 84.0 kA
JF843P4/JF844P4
Icc 50 kA rms conditional / Ipk 105 kA
JF863BM/JF864BM
Icc 50 kA rms conditional / Ipk 105 kA
JF843BM/JF844BM
Icc 50 kA rms conditional / Ipk 105 kA
JF864BSW
Icc 50 kA rms conditional / Ipk 105 kA (backup fuses)
*800LBS
Icc 50 kA rms conditional / Ipk 105 kA (backup fuses)
